Automatic clamping replaces labor-intensive bolt tightening.
Loading / Unloading dies is safe and easy with die lifters
and pre-rollers.
The operation panel has user-friendly push-button controls.
Operator error is prevented by the interlock circuit,
and makes your workplace safer.
HQA Clamp
T-Slot Manual Slide
ModelHQA
Automatic Clamp with No Hydraulic Use. Slides in the T-slot and clamps the U-cut of the die.
HQB Clamp
T-Slot Manual Slide
ModelHQB
Automatic Lever Clamp with No Hydraulic Use. No U-cuts are required.
Pneumatic Free Roller Lifter
ModelRQC
Easy to Transfer and Locate a Die.Die Lifter without Hydraulic Pressure.
Air Valve Unit
For All-Pneumatic System
ModelMV90
Air Valve Unit Suitable for Control of All-Pneumatic System
Air Valve Unit
For Pneumatic Free Roller Lifter
ModelMV70
Air Valve Unit Suitable for Control of Pneumatic Free Roller Lifter
Air Hand Valve
For Pneumatic Free Roller Lifter
ModelMV106
Air Hand Valve Suitable for Control of Pneumatic Free Roller Lifter
GA Clamp
T-Slot Manual Slide
ModelGA
GA clamp slides in the T-slot and locks in the U-cut of the die. It is a compact single action cylinder and space efficient for mounting.
We provide a variety of options to meet your needs.
GD Clamp
T-Slot Automatic Slide
ModelGD
GA clamp with an air cylinder.
Most suitable for inaccessible area or non-operation side.
Clamp movement is all automated.
GBB Clamp
T-Slot Manual-Slide (Single Action)
ModelGBB
Lever clamp that slides in the T-slot by hand. Suitable for non-standardized die widths.
GBC Clamp
T-Slot Manual-Slide/Longer Stroke
(Single Action)
ModelGBC
Lever clamp that slides in the T-slot by hand. Suitable for non-standardized die widths. Longer stroke allows for the variation in die clamping thicknesses.
GBE Clamp
T-slot Automatic-Slide (Single Action)
ModelGBE
GBB clamp with an air cylinder that slides in the T-slot and locks the die automatically by remote control.
GBF Clamp
Longer Stroke/T-Slot Automatic-Slide
(Single Action)
ModelGBF
GBC clamp with an air cylinder that slides in the T-slot and locks the die automatically by remote control.
GBP Clamp
Block-Fixed (Single Action)
ModelGBP
Block fixed lever clamp which does not require T-slot. Fixed with bolts and easy to install on a press without T-slots.
GBQ Clamp
Longer Stroke/Block-Fixed (Single Action)
ModelGBQ
Block fixed lever clamp which does not require T-slot. Fixed with bolts and easy to install on a press without T-slots.
GN Clamp
Swing Rod Clamp for Lower Die
ModelGN
Clamp rod swings to avoid interfering with the die when loading or unloading the lower die.
Clamps with hydraulic pressure + spring force, releases with air pressure.
GHA Clamp
Swing Rod Clamp for Upper Die
ModelGHA
Swing rod clamp for upper die withstands vibration of high-speed press.
GDL Clamp
Link Slide Clamp for Upper Die
ModelGDL
Compact Traveling Die Clamp
Hydraulic Unit
ModelCP/CR
Powered by compressed air.
Most suitable for hydraulic source of automatic clamp / RA Die Lifter.
(2ℓTank Model)
Hydraulic Unit
ModelCPB/CPC/CPD/
CPE/CQC/CQE
Powered by compressed air.
Most suitable for hydraulic source of automatic clamp / RA Die Lifter.
(5ℓ,10ℓTank Model)
Pump Unit
ModelCB/CD/CC
Air-Driven Hydraulic Unit
Most suitable hydraulic source of automatic clamp/RA die lifter.
Used in combination with BC/BH non-leak hydraulic valve unit.
Non-Leak Valve Unit Electrical Control Type
ModelBC
Electrical control type non-leak valve unit which is most suitable for auto clamps and RA die lifters. Used in the combination with CB/CD/CC pump unit.
Non-Leak Valve Unit Manual Operation Type
ModelBH
Manual control type non-leak hydraulic valve unit. Most suitable for manual control of RA die lifter. Used in the combination with CB/CD/CC pump unit.
Air Valve Unit
ModelMV
Electrical control type air valve unit which is most suitable for controlling air cylinders which are used for GD/GE clamp to slide in T-slot automatically.
YP Operation Panel/Control Unit
Operation Panel・Control Unit Separated Type
ModelYP
Die change operation panel with user-friendly controls.
It prevents misoperation with the interlock function.
Various circuit structures to match system specifications.
YAA Operation Control Panel
Operation Panel/Control Unit United Type
ModelYAA
User-friendly controls for die change system.
Hydraulic Die Lifter
ModelRA
Set in the T-slot or U-slot.
Easy to load/unload the die with hydraulic lifting rollers.
Hydraulic Free Roller Lifter
ModelRQA
Set in the T-slot or U-slot.
Able to lift up and move a die flexibly with a light force.
Spring Die Lifter
ModelRB
Set in the T-slot or U-slot.
Easy to load/unload the die with spring lifting rollers.
Pre-Roller
ModelMR□
Allows the die to roll from the front of the press onto the bolster.
Makes loading and unloading the die with a crane or forklift safe and easy.