Quick Connect Ejector Rods
-
Quick Connect Ejector Rods
ModelPME
The ejector rod has been divided into a base rod and an attachment rod for speed, simplicity and ease-of-use when changing ejector patterns. No tools are required, allowing changes in mere seconds.
-
PMC Ejector Coupler (Air)
ModelPMC
Manual to Automation!
Ball Lock Joint Provides Powerful Connection.
Automatic connection of the extrusion plate and ejector rods reduces setup time. -
PMD Center Pull Back (Air)
ModelPMD
Manual to Automation! Drastically reduce the setup time.Ball Lock Joint for Powerful Connection.Automatic connection with the ejector plate reduces setup time.
Magnetic Clamp
-
Magnetic Clamp
ModelMAK/MAG
Magnetic clamping systems that ensure safety in operations. It is not necessary to unify mold sizes.Dramatic reduction in mold changing time.
-
Control Unit/Operation Panel
(for Magnet Clamp)ModelMU□
MU□ consists of palm-sized operation panel and compact control unit to check clamping force of Magnet Clamp at hand.
-
Safety Chain
ModelMES
Safety chain prevents mold from falling by any chance.
Hydraulic Clamp G series
-
GBB Clamp
T-Slot Manual-Slide (Single Action)ModelGBB
Lever clamp that slides in the T-slot by hand. Suitable for non-standardized mold widths.
-
GBC Clamp
T-Slot Manual-Slide/Longer Stroke
(Single Action)ModelGBC
Lever clamp that slides in the T-slot by hand. Suitable for non-standardized mold widths. Longer stroke allows for the variation in mold clamping thicknesses.
-
GBE Clamp
T-slot Automatic-Slide (Single Action)ModelGBE
GBB clamp with an air cylinder that slides in the T-slot and locks the mold automatically by remote control.
-
GBF Clamp
Longer Stroke/T-Slot Automatic-Slide
(Single Action)ModelGBF
GBC clamp with an air cylinder that slides in the T-slot and locks the mold automatically by remote control.
-
GBM Clamp
Manual Block-Slide (Single Action)ModelGBM
Block fixed clamp which does not require T-slot, and slides in the block by hand.
-
GBR Clamp
Automatic Block-Slide (Single Action)ModelGBR
Block fixed clamp which does not require T-slot, and automatically slides in the block with an air cylinder.
-
GWA Clamp
Fixed Type (Double Action)ModelGWA
GWA clamp adopting a mechanical locking system, is a highly reliable clamp which maintains its clamping power when the hydraulic pressure for locking drops to 0.Lock・release check switches are attached as a standard.
-
GLA Clamp
T-Slot Automatic Slide (Double Action)ModelGLA
GWA clamp T-slot automatic-slide type.For the dies with different width.
Hydraulic Unit / Valve Unit (For Hydraulic Clamp)
-
Hydraulic Unit
ModelCPB/CPC/CPD/
CPE/CQC/CQEHydraulic Unit which is driven by factory compressed air is suitable for the hydraulic source of hydraulic clamp G series.
-
Hydraulic Valve Unit
For GWA/GLA ClampModelMV00
Valve unit for operating GWA/GLA clamp with hydraulic pressure of I. M. M. Pressure relief valve is equipped in the lock circuit.
-
Air Valve Unit
ModelMV30
Electric Controlled Air Valve Unit For controlling air cylinder of GE/GLA clamp that slides in T-slot automatically.
Pneumatic Clamp H series
-
HC Clamp
Fixed Type (Double Action)ModelHC
Exert equivalent clamping force as hydraulic clamp with mechanical lock function + air pressure + spring force.It maintains pressure and prevents a mold from falling even when air pressure reduces to zero. Lock・release check switches are attached as a standard.
-
HB Clamp
T-Slot Manual Slide (Double Action)ModelHB
HC clamp with T-slot manual slide type. For the mold with different width.
-
HE Clamp
T-Slot Automatic Slide (Double Action)ModelHE
HB clamp with an air cylinder.It automatically slides the T-slot and clamps the mold by remote control.
Pneumatic Clamp Q series
-
QB Clamp
T-Slot Manual Slide (Double Action)ModelQB
QB clamp exerts equivalent clamping force as hydraulic clamp with newly developed mechanical lock function + air pressure + spring force. Manually slid in the T-slot. For the molds with different width.
-
QE Clamp
T-Slot Automatic Slide (Double Action)ModelQE
QB clamp with an air cylinder.It automatically slides in the T-slot and locks the mold by remote control.
-
QM Clamp
Manual Slide in the Block (Double Action)ModelQM
Block-fixed type clamp. No T-slot is required.It can be slid in the block manually. For the molds with different width.
-
QR Clamp
Automatic Block-Slide (Double Action)ModelQR
The Block-Fixed Lever Clamp needs no T-slot. It can be automatically slid in the block by air cylinder. For Non-Standardized Mold Widths.
Valve Unit (For Pneumatic Clamp)
-
Air Valve Unit
For Air Clamp H SeriesModelMV70
Most suitable for controlling H series air clamps. It is able to check pressure increase with a pressure switch.
-
Air Valve Unit
For Air Clamp Q SeriesModelMV90
Most suitable for controlling Q series air clamps.It is able to check pressure increase with a pressure switch.Boosting valve solves shortage of air pressure.
Operation Panel/Control Unit
-
Operation Panel / Control Unit
For Hydraulic ClampsModelYMC/YMV
Most suitable for controlling hydraulic clamps.
-
Operation Panel / Control Unit
For Air Clamp H SeriesModelYMC/YMV
Most suitable for controlling Air Clamp H Series.
-
Operation Panel / Control Unit
For Air Clamp Q SeriesModelYMC/YMV
Most suitable for controlling
Air Clamp Q Series.
Accessories
-
Auto Coupler
ModelJLP/JLS
Auto coupler is designed to connect a variety of flow circuits. JLP/JLS is the auto coupler with check valve to be used in automation of hydraulic circuit, air circuit and coolant.
-
JMC/JMD Multi Coupler
ModelJMC/JMD
Safe, Simple and Quick.
Connects and Disconnects Multiple Couplers at Once.
-
Mold Locator (Manual)
Model MHB
Just "pull-out" and "insert" to locate molds with non-standardized heights. No locating ring is required. Quick and Simple Mold Locating!
-
MHL Level Unit
ModelMHL
Adjust the mold level just by loading.
Able to adjust the mold level and locate the mold with normal crane operation.