GKB ClampT-Slot Manual Slide Clamp
ModelGKB
Designed for use under severe conditions where mold lubricant and/or molten metal may spatter.
GKC ClampT-Slot Manual-Slide Clamp
ModelGKC
Longer Stroke Model of GKB Clamp
GKE ClampT-Slot Automatic-Slide Clamp
ModelGKE
Automatic Slide Model of GKB Clamp
GKF ClampT-Slot Automatic Slide Clamp
ModelGKF
Automatic Slide Model of GKC Clamp
Hydraulic Unit
ModelCP□/CQ□/CT□/CU□
Air-Driven Hydraulic Unit suitable for hydraulic source of automatic mold clamps for die casting machine.
Air Valve Unit
ModelMV
Air Directional Control Valve which is actuated by electrical signal. Suitable for controlling the air cylider of GKE/GKF clamp.
Operation Panel / Control Unit
ModelYMD
Mold Change Operation Panel with User-Friendly Controls.
High-Power Core Push Cylinderr
ModelPCE
The built-in mechanical lock withstands casting pressure with 2.5 times thrust force compared to the same size general cylinder.
High-Speed Core Pull Cylinder
Model PCB
Interchangeable with general core cylinder.Reduces cycle time.
High-Speed Core Pull Cylinder Smaller Model
ModelPCM
Smaller High-Speed Core Pull Cylinder (Cylinder Inner Diameter φ40, φ50mm)
High-Power Core Pull Cylinder
ModelPCA/PCC
Pulls out the core with 1.8 times thrust force to the same size general cylinder.
Flat Cylinder
ModelPCD
Compact cylinder designed for mounting inside a mold. Suitable for partial pressurization,and opening/closing a vent valve.
Ejector Coupler
ModelPMF
No connecting work is required. One touch to connect ejector rods with button operation from outside the machine.
Manual Ejector Coupler
ModelPMG
Manually Operated Ejector Coupler. One touch to connect an ejector rod and an ejector plate, reducing setup time in half.
