Hydraulic pump that drives low to high hydraulic pressure simply with compressed air. It is explosion-proof since no electric motor is used.

Hydraulic pump that drives low to high hydraulic pressure simply with compressed air. It is explosion-proof since no electric motor is used.

The incoming pressure is boosted by the bypass and back-and-forth action of piston and discharged to the outgoing side. Since pressure is continuously discharged, there is no limitation in the capacity of outgoing circuit. It is most suitable for multiple actuators or large circuit capacity....

External force generates pressure inside the fixture.

Compact, Low-Vibration, Low-Noise Compressor For localized air supply. * Please contact us for detailed information of this product. * This product is intended for the United States, Canada, China, and Southeast Asia. (Not for sale or use in Europe or India.)

BAS valve maintains pressure even if the pressure supply from the hydraulic pressure source is cut off. It keeps the hydraulic cylinder operation. With a pressure switch it is also able to check the pressure. Please contact us for further information.

Non-leak auto coupler requires only a small amount of pressing force for any operating pressure. Since the load to jig side is small, it is suitable for simplifying connection device.

It is an electrical directional control valve that operates built-in non-leak valves by switching air solenoid valve electrically. It maintains the pressure in outgoing side circuit even if the pressure supply is cut off from the hydraulic power source.

Electrical control non-leak valve unit which is most suitable for auto clamps and RA die lifters. Used in the combination with CB/CD/CC pump unit.

Even if pressure supply from the hydraulic power source is stopped, the outgoing side pressure is held until the pressure is supplied to pilot port. Even if the hydraulic power source is cut off due to energy saving (Stop hydraulic supply to incoming side) or blackout etc., it holds the pressure...

A non-leak valve (double action type) is equipped with a non-leak function, unless the hydraulic pressure is supplied to B1 port. A2 port side is held even if the hydraulic power source is cut off with hydraulic pressure. (Pilot check valve)

Non-leak auto coupler equipped with aligning mechanism to enable connection and disconnection under a pressurized condition.

Pilot check valve makes a smooth connection and disconnection of coupler without reaction force. It holds the pressure at fixture side even when the supply of pressure is stopped with coupler connected conditions.

Pilot check valve makes a smooth connection and disconnection of coupler without reaction force. It holds the pressure at fixture side even when the supply of pressure is stopped with coupler connected conditions. BGD (hydraulic pressure source side) has air blow function.

Suitable for connecting the machine side and the fixture side of APC. Enables temporal pressure holding during APC exchange.

Pilot check valve makes a smooth connection and disconnection of coupler without reaction force. It holds the pressure at fixture side even when the supply of pressure is stopped with coupler connected conditions.

Manual control non-leak hydraulic valve unit. Most suitable for manual control of RA die lifter. Used in the combination with CB/CD/CC pump unit.

It is a manual directional control valve that holds outgoing side hydraulic pressure even after the pressure supply is cut off.

Non-leak auto coupler equipped with aligning mechanism to enable connection and disconnection under a pressurized condition. BJS (hydraulic pressure side) has air blow function.

Non-leak valve completely maintains pressurized condition even when power source is cut off from the fixture. It is possible to disconnect the fixture that maintains pressure in an actuator from hydraulic source.

This valve prevents deformation of the workpiece during unclamping sequence. This will be useful when using work support and clamp actuator in opposite position. When releasing, the incoming side pressure reduces around 1/20 of outgoing side pressure. Then outgoing side pressure starts to reduce.

This valve operates multiple actuators in sequence to perform positioning and clamping. When incoming port pressure reaches the sequence setting pressure value, the pressure is supplied to outgoing port.

This valve operates multiple actuators in sequence to perform positioning and clamping. When incoming port pressure reaches the sequence setting pressure value, the pressure is supplied to outgoing port.

This valve operates multiple actuators in sequence to perform positioning and clamping. When incoming port pressure reaches the sequence setting pressure value, the pressure is supplied to outgoing port. | NEW | The new vertical valve allows for efficient use of vertical space, enabling compact...

Non-leak reducing valves reduce hydraulic circuit pressure of a fixture. Partial in-line circuit pressures can be reduced. More compact than the conventional BM model.

Non-leak reducing valve to partially reduce hydraulic circuit pressure of a fixture by pipe model reducing valve that doesn't need a drain port. More compact than BM model.

Non-leak reducing valves reduce hydraulic circuit pressure of a fixture. Partial in-line circuit pressures can be reduced. | NEW | The new vertical valve allows for efficient use of vertical space, enabling compact jig design. Can be placed with a narrow distance. Operation and maintenance are...

Non-leak auto coupler equipped with aligning mechanism to enable connection and disconnection under a pressurized condition. Threaded end design is suitable for saving space in multiple connections.

It is possible to reduce circuit pressure of fixture disconnected from hydraulic power source by pilot operation. (Kosmek reservoir is a tank with non-leak check valve that holds discharged oil from pilot reducing valve temporarily.)

Even if pressure supply from the hydraulic power source is stopped, the outgoing side pressure is held until the pressure is supplied to pilot port. Even if the hydraulic power source is cut off due to energy saving (Stop hydraulic supply to incoming side) or blackout etc., it holds the pressure...