KOSMEK LTD. products Kosmek QUICK MOLD CHANGE SYSTEMS[QMCS]

Home >products > QMCS > OPERATION CONTROL PANEL


	To meet the need for various kinds of small quantity stocks, this system changes the mold of the injection molding machine quickly, safely and reliably, providing one-minute setups.

OPERATION CONTROL PANEL

Many types of KOSMEK Operation Control Panel are available corresponding to each mold exchange system.

♦MODEL CODE

♦MAIN SPECIFICATIONS

*1.Panels other than the above will be manufactured as a special order.

♦OUTLINE

♦EXAMPLES OF OPERATION PROCEDURE [YMB051-VGE10]

*If you need an operation procedure for other models, please contact us.

•UNLOADING MOLD

•LOADING MOLD

INTERLOCK INPUT AND OUTPUT

Molding machine output	Content
Mold change mode	A signal indicating machine is in low-speed mold set mode.
Pressurize (Mold touch)	A signal to ensure the mold is completely closed;required to release mold clamps to prevent mold dropping.
Nozzle backward limit	A signal to ensure the nozzle or injection unit is in the backward position to prevent the nozzle from being damaged when taking out the mold.
Ejector backward limit	A signal to ensure the ejector is in the backward position to prevent the ejector from being damaged when taking out the mold.

Molding machine input	Content
Mold open OK	A signal to indicate the clamp system is ready for mold opening.
Mold close OK	A signal to indicate the clamp system is ready for mold closing.
Mold change "ON"	A signal to indicate the clamp system is in "Mold Change" mode.
Clamp alarm	The clamp system has an alarm condition and the machine should be stopped.
Hydraulic pressure demand	A signal requesting the machine to supply hydraulic pressure to Lock or Release the clamps.

Note)
1.	Signals shall be sent and received at the dry contact.
2.	Use output contact for micro signal for the molding machine. (DC 24 V and 10 mA)
3.	Rating of output contact of the operation control panel is DC 24 V and 0.5 A.
4.	Be careful that each name may differ depending on the molding machine manufacturer.
5.	If you need input and output other than the above (special), contact us.

•FOR FURTHUR INFORNATION ON UNLISTED SPECIFICATIONS AND SIZES, PLEASE CALL US.
•SPECIFICATIONS ARE SUBJECTED TO CHANGE WITHOUT NOTICE.

Home >products > QMCS > OPERATION CONTROL PANEL

Top of Page