| Home News Contact Sitemap Login |  |
 |
|
|
|||
|
| Home >products > KOBE > CS Hydraulic Unit |    |
 |
  |
 |
| Each product based on original technology assured with many industrial rights of ownership and accumulated know-how from abundant experience will create new productivity in every scene. | ||
 AA/AB/AC Hydraulic Pump |
BSP Modular Type Non-leak Pilot Check Valve |
BAS Non-leak 3-port valve |
| BC Non Leak Valve Unit |
BH Non Leak Valve Unit |
CB Pump Unit |
| CC Pump Unit |
CP Hydraulic Unit |
 CS Hydraulic Unit |
| JB Pressure switch |
|
| The CS unit is a hydraulic unit equipped with the AC pump used for the system requiring a flow rate higher than of the CP unit.B |
|
|
|
 |
|
 |
| *1. | When using special fluid, contact us. |
| *2. | If hydraulic oil having viscosity higher than the shown value, action time in creases. |
| *3. | In case of a low ambient temperature, action time increases because of high viscosity of hydraulic oil. |
| *4. | When air contains a large amount of moisture, or air supply piping is located at the end of entire piping, always equip with an automatic drain type air filter. |
| *5. | When the hydraulic circuit is equipped with a pressure gauge, install a damper or use an oil filled (glycerin) type pressure gauge to prevent pressure gauge damage due to pressure surging. |
| *6. | Provide space having the same height as the tank at the bottom of the unit considering hydraulic oil change (Tank cleaning and suction strainer tightening become easier). |
| *7. | Standard setting value of pressure switch shall be 70% of the normal pressure. |
|
 |
| •FOR FURTHUR INFORNATION ON UNLISTED SPECIFICATIONS AND SIZES, PLEASE CALL US. •SPECIFICATIONS ARE SUBJECTED TO CHANGE WITHOUT NOTICE. |
| Home >products > KOBE > CS Hydraulic Unit | |
 Top of Page |
|
 |
 |
 |
 |
|
 |
 |
|
 |
 |
 |
|
 |
 |
 |
 |
