| Home News Contact Sitemap Login |  |
 |
|
|
|||
|
| Home >products > KOBE > BSP Modular Type Non-leak Pilot Check Valve |    |
 |
  |
 |
| Each product based on original technology assured with many industrial rights of ownership and accumulated know-how from abundant experience will create new productivity in every scene. | ||
 AA/AB/AC Hydraulic Pump |
 BSP Modular Type Non-leak Pilot Check Valve |
BAS Non-leak 3-port valve |
| BC Non Leak Valve Unit |
BH Non Leak Valve Unit |
CB Pump Unit |
| CC Pump Unit |
CP Hydraulic Unit |
CS Hydraulic Unit |
| JB Pressure switch |
|
| ̈͋Pressure is held even if pressure supply from the hydraulic source is stopped. Capable of holding the hydraulic cylinder action. Mounting surface conforming to ISO 4401-03 |
|
|
| Without pressure compensating valve |
 |
| With pressure compensating valve |
 |
| Note: The relief pressure setting value is the operating pressure plus with the value shown in the table. |
| Note: | 1. | When stopping hydraulic pressure supply to the
A1 (B1) port to hold pressure at the A2 (B2) side, take the pressure loss due to an oil temperature drop into consideration. |
| 2. | This pressure compensating valve is used for relieving
pressure resulting from the oil volume increase due to an oil temperature
rise. It cannot be used for reducing the supply pressure higher than the relief setting pressure. |
|
| 3. | In case of BSP with pressure compensating valve, generation of back pressure at the T port may result in failure of normal relief action. Contact us for this problem with pressure compensating valve. |
|
|
||
 |
 |
| •FOR FURTHUR INFORNATION ON UNLISTED SPECIFICATIONS AND SIZES, PLEASE CALL US. •SPECIFICATIONS ARE SUBJECTED TO CHANGE WITHOUT NOTICE. |
| Home >products > KOBE > BSP Modular Type Non-leak Pilot Check Valve | |
 Top of Page |
|
 |
 |
 |
 |
|
 |
 |
|
 |
 |
 |
|
 |
 |
 |
 |
